Product details
Our Brand NEW EchoAlert® is a full wireless alerting system with the connection range up to 100 metres (up to 50 meters range for Bell Push) to help secure your home (clear line of sight for radio signals). It discovers smoke and smouldering fire at an early stage and sends radio signal direct to powerful vibrating pager which can be placed under the pillow or on the bed table during the night time or attached to the belt clip during the day time.
EchoAlert® is a unique system in that it also offers accessories including in the kit. Kit includes as standard:
EchoAlert® Vibrating Pager (master unit) – it is a portable vibrating and flashing alarm which can be connected wirelessly to a number of accessories including EchoAlert® Bell Push, EchoAlert® Smoke Alarm and EchoAlert® Sound Sensor to alert the user through a strong vibration and flash signal when any of accessories are triggered. It indicates which accessories have been triggered using bright LEDs. It is powered by 2x AA alkaline batteries and last up to 2 years (depends on the usage). This device is small, lightweight and discreet to provide maximum comfort in every day use.
Fig.1 EchoAlert® Vibrating Pager
EchoAlert® Smoke Alarm – 
it is an optical wireless smoke alarm device connected to EchoAlert Vibrating Pager (master unit) to alert user if smoke is detected. It has built in long life battery (10 years) so there is no need to worry about replacing battery every year. It is easy to install using our unique magnet plate system so no need to drill holes in your ceiling (standard screws also provided). Easily accessible test button for your monthly test.
EchoAlert® Sound Sensor- 
it is a device to detect various, high pitched sounds including existing Fire, CO or burglary alarms, it may pick up even intercomms or landline phones if the sound is loud enough and have high frequency ringers. It is paired with EchoAlert Vibrating Pager (master unit) to notify user if sound is detected. This device is powered by two AA Alkaline batteries, it has three sensitivity settings to set the level of sound required to trigger the sound sensor and is easy to install using screws provided. Sound Sensor should be always tested to check if it is picking up the sound correctly. You may need to adjust sensitivity or increase volume or change tone if used with intercoms or landline phones.
EchoAlert® Bell Push –
it is paired with EchoAlert® Vibrating Pager (master unit) to alert user when someone is at the door. It can be placed on the door frame using double sided tape or screws. It can also be used as a Call Button with lanyard hook to alert the carer if needed (lanyard not provided). Please note that if bell push is installed in humid environment additional waterproof cover (included) can be used to provide extra protection. IMPORTANT: Bell Push range is limited up to 50 meters (clear line of sight for radio signals).
Safety Instructions and Precautions:
PLEASE NOTE: EchoAlert® is not compatible with EchoChime300 range.
Using this product incorrectly could adversely affect your hearing. Please follow the step-by-step instructions carefully!
- To install and operate EchoAlert®Smoke Alarm you must read and follow separate instructions provided (digital or paper version)
- Do not use in an environment that is damp, wet, very hot or very cold.
- To clean the EchoAlert® and its accessories use only a soft cloth and an inorganic cleaner.
- Please refer all servicing to qualified personnel only. Do not attempt to open the units, this will invalidate the warranty. Note: if the serial numbers or labels are removed your warranty is invalid.
- To increase working time, we recommend using a good quality, alkaline batteries. Using poor quality, leaking batteries could affect working time or even damage products. Please insert batteries correctly according to polarity marks.
- EchoAlert® Smoke Alarm has built in 10 years life span battery and this battery is not replaceable.
- EchoAlert® Vibrating Pager produces bright flashing light with 0.275 Hertz frequency (approx. 1 flash every 4 seconds). Do not look directly into it.
- Due to small parts and batteries, it must be kept out of the reach of young children
- Please note this product is not fully waterproof. We recommend using weatherproof cover provided if bell push used in wet, damp, or dusty environment.
- Fully functioning EchoAlert® Vibrating Pager (paired correctly) must be kept within prescribed range at all the times to ensure operation of the whole system.
- Working Distance: Smoke Alarm and Sound Sensor – up to 100 meters clear line of sight for radio signals, Bell Push – up to 50 meters clear line of sight for radio signals. ALWAYS test the equipment after installation if the units are in operating distance.
- Sound Sensor should be always tested to check if it is picking up the sound correctly. You may need to adjust sensitivity or increase volume or change tone of your intercom or landline.
FAQ:
Can it trigger epileptic seizures? What rate of flashing light can trigger seizures?
Between 3-30 Hertz (3-30 flashes per second) are the common rates to trigger seizures but this varies from person to person. While some people are sensitive at frequencies up to 60 Hertz, sensitivity under 3 Hertz is not common. For more information we recommend to visit Epilepsy Society website
EchoAlert® Vibrating Pager produces bright flashing light with 0.275 Hertz frequency (approx. 1 flash every 4 seconds)
The user is cautioned that changes and modifications made to the equipment without the approval of Hearing Products International Ltd could void the user’s authority to operate this equipment and invalidate warranty.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications of this equipment.
- This product is not medical device, it is not classified as such device and have no medical purpose.
Product code 474-1006-01
